ELOFIT

elofitbanner

 ELOFIT is a High Density Polyethylene – HDPE – PE100 system of electrofusion and spigot fittings and special components for the conveyance of water and gas under pressure.ELOFIT is manufactured in compliance with UNI standards about HDPE fittings and is certified by the most prestigious Italian and international certification bodies. It is manufactured in accordance with the provisions of Ministerial Decree dated 24th November 1984 and meets the requirements set by circular letter no.102 by the Italian Ministry of Health dated 2nd December 1978.ELOFIT fittings are manufactured by injection moulding of High Density Polyethylene and achieve the highest standards as regards:

VIEW/DOWNLOAD CATALOG

Elofit polyethylene (PE100 – PE100RC – PE80 – LDPE) piping and fittings produced by Nupi Industrie Italiane S.p.A to transport medium and low pressure gas, water, industrial fluids and compatible chemicals.

Elofit Pipes, fittings and special parts can be welded by Electrofusion or Butt fusion welding technology.

Product Range:
  • Butt Weld fittings up to OD 500mm
  • Stub Flange up to OD 1000mm
  • Electro Fusion fittings up to OD 315mm
  • Electro Fusion Sockets up to 1000mm
  • Branch Saddle & Tapping Tee up to 1000mm
  • Repair Clamps from 200mm to 1000mm
img_0dc7b8e2e5
img_9ca5abd23c
img_051e683db4
img_958cfb7338
img_53427bc61d
img_fa0ac64fcc
img_fa4f5ec1c2
ELOFIT fittings are manufactured by injection moulding of High Density Polyethylene and achieve the highest standards as regards:
 
  • Corrosion resistance
  • Resistance to stray currents
  • Impact resistance
  • Resistance to chemical agents
  • Abrasion resistance
  • Resistance to micro-organisms
  • Reliability for more than 50 years
  • Non-toxicity

ELOFIT is suitable for the conveyance and distribution of drinking water and alimentary fluids, fuel and inert gases and for water treatment plants, centralised irrigation and sewage systems, fire protection systems and pipe relining.The ELOFIT system is mostly assembled through the electrofusion process.On the inside, the fitting houses electrical resistors connected to the outside cable terminals. When current moves through them, these resistors generate the heat needed to melt polyethylene.Energy is transmitted directly and exclusively to the surface where pipe and fitting come into contact with each other, producing heat welding.The main feature of ELOFIT fittings is the high quality and reliability of the welding. When it cools down, the connection is even, strong, safe and reliable.ELOFIT fittings boast the most renowned international certifications.